aFe Dodge Ram Air Intake Systems

Top > DODGE RAM > FUEL SAVERS

$354.95

aFe Dodge Ram Magnum Force Stage 1 Cold Air Intake System With Pro-Guard 7 03-07 5.9L

Your Dodge Ram deserves the power and efficiency with the aFe Magnum Force Stage 1 Cold Air Intake System with Pro-Guard 7.

Features:

Replaces your stock air box

Noticeable improvement in airflow

Retains the stock intake tract

4-1/2" Inlet diameter

Uses stock mounting points

No need to cut or drill

16-Gauge powder-coated steel for durability

Prepositioned PEM-nuts for easier installation

Prepositioned opening for stock attachments

Pro-Guard 7 high flow efficiency media air filter

Increased air flow up to 50%

Increases horsepower and torque

Improves fuel economy

Wire mesh for structural integrity and quality

Convenient quick and easy cleaning

In designing out the stock air box, aFe always try to design in the largest air box that they can. When replacing the stock intake tube, you have more flexibility since you can change the tube configuration. However, adapting to the stock intake tube forces some limitation on the design. Even with adapting to the constraints of the stock intake tube, aFe are careful to use the stock mounting points. There is no need to cut or drill anything when you install the aFe kits.

At first glance you probably wouldn't notice the unique features that aFe design into each air box. They are there for a purpose, either to make your job of installing this system easier or to improve the performance of your vehicle.

With the aFe Dodge Ram Magnum Force Stage 1 Cold Air Intake System with Pro-Guard 7, you replace the stock air box and the stock air filter. By replacing the restrictive air box and air filter, there is a noticeable improvement in airflow and power. However, this intake system retains the stock intake tract. The aFe engineers can develop this system kit quickly because they are not tackling the stock intake tube, which often interfaces with the factory mass airflow sensor.

Since aFe are still using the stock intake tube, the size of the filter inlet diameter is limited by the diameter of the stock tube. However, the aFe engineers still managed to increase the filter inlet diameter whenever possible. The aFe engineers have enlarged the filter to a 4-1/2" inlet diameter even though the factory intake diameter is just 3" because of our unique tapered adapter between the filter and the stock intake tube.

Model Guide

	Year	Model
	None	1500
	2003-2007	2500
	2003-2007	3500